|
1 Identification of substance:
Trade name: Silicon nitride
Stock number: SN4201,SN53490
Manufacturer/Supplier: Sun Innovations,Inc. 43241 Osgood RD. Fremont, CA 94539 |
2 Composition/Data on components:
Chemical characterization: Description: (CAS#) Silicon nitride (CAS# 12033-89-5), 96%
Identification number(s):
EINECS Number: 234-796-8 |
3 Hazards identification
Hazard description: Not applicable
Information pertaining to particular dangers for man and environment Not applicable |
4 First aid measures
After inhalation Supply fresh air. If required, provide artificial respiration. Keep patient warm. Seek immediate medical advice.
After skin contact Immediately wash with water and soap and rinse thoroughly. Seek immediate medical advice.
After eye contact Rinse opened eye for several minutes under running water. Then consult a doctor.
After swallowing Seek medical treatment. |
5 Fire fighting measures
Suitable extinguishing agents Product is not flammable. Use fire fighting measures that suit the surrounding fire.
Special hazards caused by the material, its products of combustion or resulting gases: In case of fire, the following can be released: Nitrogen oxides (NOx)
Protective equipment: Wear self-contained respirator. Wear fully protective impervious suit. |
6 Accidental release measures
Person-related safety precautions: Wear protective equipment. Keep unprotected persons away. Ensure adequate ventilation
Measures for environmental protection: Do not allow material to be released to the environment without proper governmental permits.
Measures for cleaning/collecting: Pick up mechanically.
Additional information: See Section 7 for information on safe handling See Section 8 for information on personal protection equipment. See Section 13 for disposal information. |
7 Handling and storage
Handling
Information for safe handling: Keep container tightly sealed. Store in cool, dry place in tightly closed containers. No special precautions are necessary if used correctly.
Information about protection against explosions and fires: The product is not flammable
Storage
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: None known.
Further information about storage conditions: Keep container tightly sealed. Store in cool, dry conditions in well sealed containers. |
8 Exposure controls and personal protection
Additional information about design of technical systems: Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute. Components with limit values that require monitoring at the workplace: Not required.
Additional information: No data
Personal protective equipment
General protective and hygienic measures The usual precautionary measures for handling chemicals should be followed. Keep away from foodstuffs, beverages and feed. Remove all soiled and contaminated clothing immediately. Wash hands before breaks and at the end of work.
Breathing equipment: Use suitable respirator when high concentrations are present.
Protection of hands: Impervious gloves
Eye protection: Safety glasses
Body protection: Protective work clothing. |
9 Physical and chemical properties:
Form: Powder
Color: White
Odor: Odorless
Value/Range Unit Method
Change in condition
Melting point/Melting range: 1900 oC (subl)
Boiling point/Boiling range: Not determined
Sublimation temperature / start: Not determined
Flash point: Not applicable
Flammability (solid, gaseous) Product is not flammable.
Ignition temperature: Not determined
Decomposition temperature: Not determined
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined
Upper: Not determined
Vapor pressure: Not determined
Density: at 20 oC 3.4 g/cm3
Solubility in / Miscibility with
Water: Insoluble |
10 Stability and reactivity
Thermal decomposition / conditions to be avoided: Decomposition will not occur if used and stored according to specifications.
Materials to be avoided: None known.
Dangerous reactions No dangerous reactions known
Dangerous products of decomposition: Nitrogen oxides |
11 Toxicological information
Acute toxicity:
Primary irritant effect:
on the skin: May cause irritation
on the eye: May cause irritation
Sensitization: No sensitizing effects known.
Subacute to chronic toxicity: Inorganic silicon compounds may be acute inhalation irritants. Prolonged inhalation may cause pulmonary fibrosis known as silicosis.
Additional toxicological information: To the best of our knowledge the acute and chronic toxicity of this substance is not fully known. No classification data on carcinogenic properties of this material is available from the EPA, IARC, NTP, OSHA or ACGIH. |
12 Ecological information:
General notes: Do not allow material to be released to the environment without proper governmental permits. |
13 Disposal considerations
Product:
Recommendation Consult state, local or national regulations for proper disposal.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations. |
14 Transport information
Not a hazardous material for transportation.
DOT regulations:
Hazard class: None
Land transport ADR/RID (cross-border)
ADR/RID class: None
Maritime transport IMDG:
IMDG Class: None
Air transport ICAO-TI and IATA-DGR:
ICAO/IATA Class: None
Transport/Additional information: Not dangerous according to the above specifications. |
15 Regulations
Product related hazard informations: Observe the general safety regulations when handling chemicals
National regulations All components of this product are listed in the U.S. Environmental Protection Agency Toxic Substances Control Act Chemical Substance Inventory.
Information about limitation of use: For use only by technically qualified individuals. |
16 Other information:
Employers should use this information only as a supplement to other information gathered by them, and should make independent judgement of suitability of this information to ensure proper use and protect the health and safety of employees. This information is furnished without warranty, and any use of the product not in conformance with this Material Safety Data Sheet, or in combination with any other product or process, is the responsibility of the user. |
|